subwoofer box design software free download

Wait for the glue and sealant to dry completely before going any further.This can be attached using a spray adhesive. Once you have an open-end (whatever shape you chose) place a bead of silicone all along the inside edges of the box, tube, triangle to insure a sealed environment.Do not install the part with the holes for the speakers yet.

Run a bead of carpenter’s glue along one edge.Once everything is cut, do a mock-up of the box before you build it to make sure everything has a nice tight fit.īelow are the steps necessary to build the subwoofer enclosure: Step 4 - BuildĬut all of the pieces to the correct sizes for the interior volume you have chosen. A solid 5/8-inch thick piece will work for smaller volume applications of up to 2 cubic feet for larger applications, go with a ¾-inch thickness. However, plywood is a good option if for some reason you cannot get fiberboard. Fiberboard will minimize panel vibrations due to its density, which really makes it the better choice.

There are only two types of materials you should be using: fiberboard and plywood. Note: 1,728 cubic inches= 1 cubic foot Step 3 - Choose your Material Once you have the area, you can find the volume: Below are the equations for the most popular shapes to help to calculate the internal volume needed. You can then get the best sound and also to be sure that you have the correct internal volume for your speaker. The next step is to decide what shape to use and determine the internal volume of that shape. Below please find the speaker/driver size to enclosure volumes for your equipment.

Therefore, the box will need to be 2.5-3.5 cubic feet. For instance, a 12-inch subwoofer typically needs 2-3 cubic feet of interior space, but you may need to add a bit of extra space to ensure an easy, but snug, fit. The space you want to put the box in will greatly narrow down the choices. When designing a subwoofer enclosure, the first thing you need to do is measure the space you will be placing the box. This article will go through the steps to create a sealed subwoofer enclosure. The sealed box is the most popular choice due to excellent dampening, power handling, and ease of design. When these waves are not separated they tend to cancel each other out. These boxes separate the sound waves in the front from in the back. Sealed subwoofer enclosures are simply an air-tight enclosure built to improve and enhance the speaker’s performance. However, these systems are also much more complex to build than the sealed enclosures. These boxes channel the sound waves from the speaker from both the front and rear and help with making better sound by providing a lower bass reproduction and a low distortion level. The vented enclosure-or ported enclosure-is a more efficient choice.

Subwoofer box design software free download